You change your oil religiously.  You follow the maintenance schedule to the letter.  But there is one thing that few people ever think about - and it can really prolong the life of your engine!

Simply changing the oil in your BMW is not enough.  Over time, particulates and sludge develop that can't be trapped by your oil filter.  These deposits build up, causing increased friction and heat - robbing your engine of the power and efficiency originally designed.  As much as 1/2 a quart of sludge, old contaminated oil and abrasives can remain in your engine after a regular oil change.

You may have heard about flushing your cooling system periodically to remove mineral buildup and renew your coolant.  We use a special tool to do the same thing for your lubrication system.

The Bilstein R-2000 system uses pulsating pressure to circulate a special cleaning fluid through your engine.

This heated solution removes varnish, sludge and wear metals from your crankcase, filter screen, oil passages, and oil pump.

The process is done with the engine off, so there is no additional wear or heat imposed.

Special adaptors are used at the oil filter (1) and the drain plug (3), allowing the unit to pump pressurized solutions through the engine (2) and vacuum out the solution and contaminants.  Now your engine is ready for clean, fresh oil - oil that will stay clean longer.

Flushing your engine oil every 15,000 miles will provide you with better fuel economy, a longer lasting engine, lower emissions and best of all - peace of mind, knowing that you are truly taking care of your car.  If you would like to have your engine flushed, we are currently offering a special discount to our VIP customers.  Click on the coupon link at the left and come on in!